Motor Drivers

Sort By:  
PCB L293D Dual H-Bridge Motor Driver
PCB for L293D Dual H-Bridge motor driver IC
PKR 20.00
CNC Shield V4 Expansion Board For Arduino Nano
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. It is a total of three slots, can drive three A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
PKR 300.00
IRF520 MOSFET Module board


  • IRF520 MOSFET, gate can be adjusted via PWM output
  • Allows Arduino to drive up to 24V loads, such as LED strips, DC motor, micro pump and solenoid valves
  • Voltage: 3.3V/5V
  • Interface: digital level
  • Output load voltage: 0~24V
  • Output load current: < 5A
  • Suitable for Arduino, SCM, ARM and Raspberry Pi
PKR 110.00
ULN2003 Motor Driver Board
ULN2003 Stepper Motor Driver Board is to use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v). It’s easy to use Arduino or other development platform to drive the stepper motor by this diver board.
PKR 80.00
TBA6560 Single Axis Stepper Motor Driver Module

Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)
Rated maximum output: ± 3A, peak 3.5A
Working voltage: DC 10V-35V
Recommended to use a switching power supply: DC24V power supply
Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.


- Using the TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
- For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
- Automatic half current function.
- 6N137 high-speed optical coupling, guarantee high speed without losing step.

Features similar products:

1. Current grade-by-adjustable to meet your demand for a variety of applications.
2. Semi-automatic flow adjustable.
3. 6N137 high-speed optical coupling, guarantee high speed without losing step.
4. Plate printed setup instructions operation without manual also.
5. Thick teeth radiator, good heat dissipation.

Package included:

1 x TB6560 1 axis driver board

PKR 800.00

Mini L298N Motor driver module is based upon SMD L298 IC making it quite simple so you can use it where space is less. This mostly fixes if size is an important issue.

This will work same as L298N Module, which is capable of controlling two DC Motors. The required supply voltage is 2-10V. This operates the motor to move in forward or reverse directions. You can even set the rotational speed. Each provides 1.5A continuous current.

Features Of Mini L298 Motor Driver

  • Built-in low-circuit-resistance MOS switch operation, minimal heat, coolant-free, small size, low power consumption, ideal for pile-running applications.
  • Small size, light weight, zero wait current is the ideal choice for your car model.


  • Operates Two DC Motors
  • Supply Voltage- 2-10V
  • Input Range- 7-8V
  • Peak Current- 2.5A
  • Low standby current- <0.1uA
  • Designed in Common Mode Transmission
  • Protected with Internal thermal Protection circuit.
PKR 150.00
L293D Motor Driver Board

This L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.

This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.

L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.

The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.

  1. Arduino Stepper/Servo software library with microstepping support.
    To install, click on Download in the top right corner, select zip and uncompress the folder.
    Rename the folder to AF-motor (check that the renamed folder contains the .cpp and .h files) and install into the Arduino sketches/libraries folder. For information how to use and install libraries, see our tutorial! This version now works with the Mega. Public domain!
  2. AccelStepper library with AFMotor support. This library allows for advanced stepper control including acceleration and deceleration, and concurrent stepper control!
    To install, click on Download in the top right corner, select zip and uncompress the folder.
    Rename the folder to AF-motor (check that the renamed folder contains the .cpp and .h files) and install into the Arduino sketches/libraries folder.

Power for the motors can be supplied from the Arduino boards DC Jack (normally 9V) or from the 2-pin EXT-PWR terminal block. If you are supplying power from the EXT_PWR terminal block you should remove the PWR jumper or you could damage the shield and the Arduino board.

<<We have a variety of modules that can be interfaced with this L293D Motor Driver/Servo Shield. Some of them are listed below click on their name to know more>>

Arduino Boards
Servo Motors
DC Motors
28BYJ-48 Stepper Motor

Features :

  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
  3. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  4. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
  5. Pull-down resistors keep motors disabled during power-up
  6. Big terminal block connectors to easily hook up wires (18-26AWG) and power
  7. Arduino reset button brought up top
  8. 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  9. Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
  10. Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!

Package Includes :

1 x L293D Motor Driver/Servo Shield for Arduino

PKR 300.00
Dual H-Bridge Motor Driver L298N

This is the popular L298N Dual H-Bridge Motor Controller, typically used to control motor speed and rotation direction. It can also be used for other products such as with LED arrays, relays, and solenoids, etc.  It's a powerful little motor driver with a heavy duty heat sink. Capable of powering 5-35V motors with a max of 2A. 

We've used up to 4 motors using the 6 onboard screw-terminals.  It has an onboard 5V regulator that can output up to 1A with components with 5V power requirement. Don't use the 5V regulated power when supplying more than 12V to motors.


  • Double H-bridge drive
  • Chip: L298N (ST NEW)
  • Logic voltage: 5V
  • Drive voltage: 5V-35V
  • Logic current: 0mA-36mA
  • Drive current: 2A(MAX single bridge)
  • Storage temperature: -20 to +135
  • Max power: 25W
  • Weight: 30g
  • Size: 43*43*27mm ( approx 1.75" x 1.75" x 1")
  • Compatible with L297/L298 driver


PKR 200.00
Per Page      1 - 9 of 9
  • 1