Power Supply

Sort By:  
AC to DC 12V 15A Switching Power Supply

Product Specification

Output Voltage12V
Output Current15A
Minimum Order Quantity1 Piece

Product Description

Features/Specifications:

  • 100% Brand New
  • High Quality & High Performance
  • Input: AC 220V 50/60Hz
  • Output:DC 12V 15A
  • 100% full load burn-in test
PKR2,000.00
Lithium Battery 18650v4.2V TP4056 Battery Charging Module
  • With Mini-USB on board connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads Great for DIY projects

Specifications:
  • Chip set: TP4056
  • Working temperature: -10'C~85'C
  • Charging indicator: Red light charging, blue light fully charged
  • With Output Terminals, so that you can use it also when battery is charging
  • With Thermal protection, reduces the charge current according to the temperature
PKR60.00
300w Adjustable Power Supply Module Xl4016 Dc-dc Max 9A Step Down
Input voltage: 5-40V
Output voltage: 1.2-35V (continuously adjustable)
Output Current: 9A (power tube temperature exceeds 65°C please add cooling fan)
Constant current range:0.2-9A ( adjustable )
Output Power: Maximum power is about 300W (power tube temperature exceeds 65°C please add cooling fan)
Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
PKR1,824.00
9-24V 3A 72W AC/DC Adapter Switching Power Supply Adjustable Power Adapter Supply
  • High efficiency, low consumption, good stability.
  • Overvoltage protection, overcurrent protection, overload protection and circuit protection.
  • Good anti-interference.
  • Fire-resistant and flame-retardant material.
  • Exquisite design has good durability.
  • Adjustable switch power adapter can adjust the temperature, pressure, speed.

Constructed from fine quality material, is easy to install, manufactured with precision, this power adapter can used for DC motor speed control, light dimmer and so on.

Features:
High efficiency, low consumption, good stability.
Overvoltage protection, overcurrent protection, overload protection and circuit protection.
Good anti-interference.
Fire-resistant and flame-retardant material.
Exquisite design has good durability.
Adjustable switch power adapter can adjust the temperature, pressure, speed.

Specifications:
Plug: EU, US (optional)
Input: 100V-240V 50/60 Hz
Output: 9-24V 3A
Working Temperature: 0-45(℃)
Package Size: 160 * 60 * 55mm / 6.30 * 2.36 * 2.17in
Package Weight: 250g / 8.82ounce

Package List:
1 * Power Adapter

PKR3,200.00
MB102 DC Power supply 5V, 3.3V

MB102 Breadboard Power Supply Module 3.3V/5V For Arduino Board

Features:

Brand new & high quality

Breadboard power supply module, compatible with 5 V, 3.3 V

Apply to MB102 breadboard

Input voltage: 6.5-12 V (DC) or USB power supply

Output voltage: 3.3V/5V can switch over

Maximum output current: <700 ma

Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V

On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

Please notice: this item only a Power Supply Module, Breadboard is not included

PKR120.00
Buck
XL4015 High Power DC-DC Step Down Converter with Digital Voltmeter

Product Description

  • Input Voltage: 4.0 - 40V (Input voltage must be higher than the output voltage by 1.5V or more)
  • Output Voltage Range: 1.25V - 37V adjustable
  • Maximum Output Current - 5A, it is recommended to use within 4.5A; Maximum Output Power - 75W
  • High Conversion Efficiency, up to 96%; Operating frequency: 180 KHz; Load Regulation Rate S (I) - 0.8%; Voltage Regulation Rate S (u) - 0.8%
  • With overheating protection and short circuit protection

Self-calibration voltage meter display
Uses more advanced microprocessor for voltage calculation
Voltmeter Accuracy ± 0.05V, Range 0 - 40V
To ensure accuracy of voltmeter, make sure the input voltage of 4.5V and above
With a button to switch the input or output voltage measurements
Voltmeter can be turned off when not needed at the touch of a button
With block terminals, no soldering is necessary and easy to use

Voltage Setting Procedure
On-board voltmeter shows the output voltage, long press the right button for 2 seconds and then release it, the voltmeter and the output voltage indicator "OUT" sync flashing, then it enters the output voltage adjustment mode
Similarly, in the voltmeter display Input voltage, long press the right button for 2 seconds and then release it, the voltmeter and the input voltage indicator "IN" sync flashing, then enter the input voltage adjustment mode
Touch the right button, press the voltage one unit, touch the left button, the voltage down one unit
After the voltage is adjusted, press the right button for 2 seconds and then release it, then you can exit the voltage calibration mode

PKR475.00
LM2596 DC-DC Buck Converter Step-Down Power Module Output 1.25V-35V
This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W) , please add a heat sink on it.
PKR120.00
Per Page      1 - 8 of 8
  • 1